• 本站微信:bfzyw168 点击关注
    天通 水处理设备 食品污水处理设备维护方法
济宁市天通机械设备有限公司
  • 所在区域:山东济宁任城区
  • 经营性质:有限责任公司
  • 企业类型:生产加工
  • 注册地:山东省济宁市任城区唐口
  • 主营产品:小型压路机,灰土拌和机,拖拽式小宝马拌和机,手扶压路机,钢筋笼滚焊机
  • 注册资金:人民币 100 - 250 万元
  • 企业已认证
  • 个人实名已认证
    商家产品分类
    “天通 水处理设备 食品污水处理设备维护方法”详细信息
产品规格: 定制 产品数量: 1500.00 台
包装说明: 定制 价格说明: 不限
查看人数: 77 人 本页链接: https://info.b2b168.com/s168-84167442.html


济宁市天通机械设备有限公司

公司简介:济宁天通水处理设备有限公司主要由污水处理站,废水处理工艺,废水处理设备、工业废水处理设备、水处理设备、污水处理设备、环保废水处理设备及其它水处理设备。济宁天通的目标是更好的产品,更好的服务和更好的声誉。目前,济宁天童已经在许多省份和单位取得了辉煌的成就,并完成了许多大型的标准化建设和配套服务,产品已出口到南美洲、南洋、西亚、欧洲等地区。虽然田通取得了一定的成绩,但我们相信田通的足迹将始终在路上奔跑!孔子曰:“三人,必有我师”,因此,我们不断结合现场实践,借鉴用户的宝贵建议,不断改进产品,提供完善的服务,力争成为最值得信赖的用户长期合作伙伴。
食品污水处理设备的维护方法
  食品污水处理设备在使用中要注意维护和保养,才能延长食品污水处理设备的使用寿命,提高使用率,下面济宁天通为你介绍的是对食品污水处理设备的维护:
  1、首先必须对食品污水处理设备建立起一套完善的保养制度,每班都应详细填写好运行记录,对于出现的情况记录在册,以便于维修;
  2、经常检查水泵、风机的螺栓连接情况,防止出现松动,若松动的太大则会引起食品污水处理设备的不安全;
  3、经常检查水泵、风机的转动轴承是否有过热现象,检查润滑油位和润滑油质量,保证设备正常运行;
  4、定期检查填料的张紧状况,发现脱落和松弛应及时补充和校正;
  5、检查曝气管道布气均匀状况,发现有大气泡或局部曝气死角应及时查找原因并排除,保证各部位曝气正常;
  6、在消毒剂投加时,应保证药剂用量和剩余量,必要时可根据检测结果调整投加量,及时补充药剂,确保出水水质合格;
  8、如果食品污水处理设备短期内部运行,可以采用风机间隙曝气,以保证微生物部死亡,方便下次运行开始时不必再重新培养微生物;
9、禁止食品污水处理设备本体内出现无水或水位过低状态,同时严禁设备运行过程中风机出现停机或假运行状态,防止菌种死亡,设备无法再次运行。
Company profile: Jining Tian Tong water treatment equipment Co., Ltd. is mainly composed of sewage treatment station, waste water treatment process, waste water treatment equipment, industrial wastewater treatment equipment, water treatment equipment, sewage treatment equipment, environmental protection wastewater treatment equipment and other water treatment equipment. Jining Tian Tong's goal is better products, better service and better reputation. At present, Jining province has made brilliant achievements in many provinces and units, and completed many large-scale standardized construction and ancillary services, products have been exported to South America, Southeast Asia, West Asia, Europe and other regions. Although Tian Tong has made certain achievements, but we believe that Tian Tong's footprints will always run on the road! Confucius said, "three people must have my teacher". Therefore, we constantly combine on-site practice and draw lessons from users' valuable suggestions, constantly improving products, providing perfect services and striving to become the most trusted long-term users.
Maintenance method of food sewage treatment equipment
Food sewage treatment equipment should be maintained and maintained in use, so as to prolong the service life and improve the utilization rate of food sewage treatment equipment. Next, Jining Tiantong introduces the maintenance of food sewage treatment equipment.
1, first, we must set up a complete maintenance system for food wastewater treatment equipment. Every class should fill in the operation records in detail, and record the recorded events for maintenance.
2, check the bolt connection of water pump and fan, prevent loosening, if loose too large, it will cause the unsafe of the food sewage treatment equipment.
3. Check whether the rotating bearings of the pump and fan are overheated, check the lubricating oil level and the quality of the lubricating oil to ensure the normal operation of the equipment.
4, check the tensioning condition of the packing regularly, and find out and relaxation should be supplemented and corrected in time.
5. Check the uniform air distribution in the aeration pipe. It is found that the large bubble or the local aeration dead angle should be found in time and excluded, so as to ensure the normal aeration of each part.
6, when the disinfectant is added, the dosage and residual amount should be guaranteed. If necessary, the dosage can be adjusted according to the test results, and timely replenishment should be made to ensure that the effluent quality is qualified.
8, if the internal operation of food sewage treatment equipment is short term, air gap aeration can be used to ensure the death of microbial department, so it is not necessary to regenerate microorganisms at the beginning of next operation.
9, the prohibition of food wastewater treatment equipment has no water or low water level in the body. At the same time, it is forbidden to stop or run in the process of operation of the equipment, so as to prevent the death of the strain and the equipment can't run again.


欢迎来到济宁市天通机械设备有限公司网站,我公司位于孔孟文化、运河文化、水浒文化的发源地—济宁市。 具体地址是山东济宁任城区唐口工业园,负责人是尹宜良。
主要经营济宁 天通,是国内成员之一的机械设备加工生产研发厂家,其核心技术以:智能自动化小型压路机、数控钢筋笼滚焊机、公路拌合机机械设备为主。 济宁 天通,始终坚持以“先做人,后做事”为核心价值观,以“儒商文化”为品牌文化,以“做今日品牌,创百年企业”为宗旨,以“实用为本、德行天下”为理念,铸造中国机械行业的百年品牌。公司依托与国外的分支机构、国内的办事处、及专业的施工队伍,凭借行业内设备研发专家团队的强大创。
单位注册资金单位注册资金人民币 100 - 250 万元。

    我要给商家留言
    商家联系方式

    济宁市天通机械设备有限公司

  • 范先生(经理)

    电话:05375159919

    手机:18953768880

    地址:山东济宁任城区唐口工业园

    网址:http://jnttjx01.cn.b2b168.com/

相关分类: 污水过滤器 污水处理仪器仪表 污水处理成套设备 加药消毒设备

相关地区: 济宁任城区 济宁兖州区 济宁微山县 济宁鱼台县 济宁金乡县 济宁嘉祥县 济宁汶上县 济宁泗水县 济宁梁山县 济宁曲阜市 济宁邹城市

关于八方 | 关于我们 | 八方币招商合作网站地图 | 免费注册商业广告 | 一元广告 | 友情链接 | 联系我们 | 八方业务| 汇款方式商务洽谈室投诉举报
粤ICP备10089450号 - Copyright © 2004 - 2025 b2b168.com All Rights Reserved