ADI DSP仿真器 ADZS-HPUSB-ICE 进口原装

ADZS-HPUSB-ICE
【产品介绍】
???ADZS-HPUSB-ICE为ADI公司出品的ADI DSP仿真器。作为ADI原厂仿真器中性能较强的一款，HPUSB ICE能够支持Blackfin、SHARC、TigerSHARC系列处理器，是目前ADI DSP客户群中使用得较为广泛的一款开发工具。

【功能参数】
?支持ADI公司全系列JTAG处理器和DSP[Blackfin/SHARC/TigerSHARC全系列处理器，以及ADSP-219X系列和ADSP-2199X系列DSP]；
?USB全速接口，支持较高1.5Mbps的下载速度；
?兼容VisualDSP++ 5.0/4.5/4.0/3.5集成开发环境；
?自动检测处理器和DSP I/O电压，兼容1.8V、2.5V、3.3V以及5V电压；
?支持多处理器仿真；
?支持14脚JTAG连接器；
?针对距离远的目标平台提供了3米长的USB电缆；
?过驱动升级可支持未来ADI DSP系列处理器；
?结构小巧简洁，安装简单，运行稳定，可靠耐用。
?
【性能测试】
?
仿真器型号/测试环境	ADZS-HPUSB ICE
向SDRAM内FILL32M数据所需时间	38秒
向SDRAM内FILL32M文件所需时间	69秒
通过PPI采集SXGA图像并在Visual DSP++5.0下还原图像	59秒
通过PPI采集QVGA图像并在Visual DSP++5.0下还原图像	38秒
?
?
【产品配置】
?????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????
序号	名称	规格型号	单位	数量	原厂标配
1	ADI DSP JTAG仿真器	ADZS-HPUSB-ICE	台	1	
2	USB线缆	-	条	1	
3	电源	5V、2A	条	1	
4	电源接口	国标、欧标、美标	个	3	
5	文档1	HPUSB/USB ICE Release Note	份	1	
6	文档2	EE-68	份	1	
7	文档3	EE-175	份	1	
8	文档4	Analog Devices DSP Collaborative	张	1	
9	ADI DSP开发软件	Visual DSP++5.0	套	1	赠
10	文档5	ADI仿真器使用注意事项	份	1	
11	保修卡	工具保修卡（2年保修）	张	1	
?
?
Analog Devices USB-Based Emulator and

High Performance USB-Based Emulator





USB-Based Emulator Key Features

?Full speed USB 1.1 interface enabling download speeds of up to 150 KB/sec

?Support for all ADI JTAG processors and DSPs

?Multiple processor and DSP I/O voltage support with automatic detection

?1.8V, 2.5V, and 3.3V compliant and tolerant

?5V tolerant and 3.3V compliant for 5V processors and DSPs

?Multiprocessor support

?14-pin JTAG connector

?3-meter USB cable for difficult-to-reach targets

?CE-certified

HP USB-Based Emulator Key Features

?High speed USB 2.0 interface enabling download speeds of up to 1.5 MB/sec

?Background Telemetry Channel (BTC) support enabling nonintrusive data exchange at up to 2.0 MB/sec

?Support for all ADI JTAG processors and DSPs

?Multiple processor and DSP I/O voltage support with automatic detection

?1.8V, 2.5V, and 3.3V compliant and tolerant

?5V tolerant and 3.3V compliant for 5V processors and DSPs

?Multiprocessor support

?JTAG clock operation up to 50 MHz

?14-pin JTAG connector

?3-meter USB cable for difficult-to-reach targets

?CE-certified

































Overview

Analog Devices’ cost-effective Universal Serial Bus (USB)-based emulator and High Performance Universal Serial Bus (HP USB)-based emulator each provide an easy, portable, nonintrusive, target-based debugging solution for Analog Devices JTAG processors and DSPs. These powerful USB-based emulators perform a wide range of emulation functions, including single-step and full speed execution with pre-defined breakpoints, and viewing and/or altering of register and memory contents. With the ability to automatically detect and support multiple I/O voltages, the USB and HP USB emulators enable users to communicate with all of the Analog Devices JTAG processors and DSPs using either a full speed USB 1.1 or high speed USB 2.0 port on the host PC. Applications and data can easily and rapidly be tested and transferred between the emulators and the VisualDSP++? development and debugging environment (available separately).

The plug-and-play architecture of USB allows the emulators to be automatically detected and configured by the host operating system. It can also be connected to and disconnected from the host without opening the PC or turning off the power to the PC. A 3-meter cable is included to connect the emulators to the host PC, thus providing abundant accessibility to hard-to-reach targets.





w w w . a n a l o g . c o m / p r o c e s s o r s / t o o l s


The HP USB emulator also supports the Background Telemetry Channel (BTC), a non-intrusive method for exchanging data between the host and target application without affecting the target system’s real-time characteristics.


CROSSCORE Development Tools

The USB-based and High Performance USB-based emulators are part of the Analog Devices CROSSCORE? Tools product line, which is composed of a comprehensive set of development tools providing engineers with easier and more robust methods for developing and optimizing systems.

The CROSSCORE components include:

?VisualDSP++ development and debugging environment

?EZ-KIT Lite? evaluation kits

?Emulators

The easy-to-use VisualDSP++ integrated development environment speeds development, debugging, and deployment while shrinking product development cycles and improving time to market.

The EZ-KIT Lite evaluation kits provide an easy way to investigate the performance of Analog Devices’ family of embedded processors and DSPs.

Emulators are available for both PCI and USB host platforms for rapid on-chip debugging.




***************************************************
联 系 人 ;雷 俊 （先 生）
深圳博瑞图电子科技有限公司
TEL:0755-36675904
MOB:
FAX:0755-83244576
ADD:深圳市福田区中航路世纪汇都会轩1416室
EMAIL: 401512450@
网     址：
***************************************************
承接销售元器件IC一条龙、专注10年