德国进口气动三片式球阀‖进口气动球阀‖进口不锈钢球阀

德国TOP托普气动三片式球阀概述：
气动三片式球阀是三片式球阀配上气动执行器。气动执行器的执行速度相对较快，较快的开关速度0.05秒/次，所以通常也叫气动快速切断球阀。气动球阀通常配置各种附件，比如电磁阀、气源处理三联件、限位开关、定位器、控制箱等，以实现就地控制和远距离集中控制，在控制室里就可以控制阀门的开关，不需要跑到现场或者高空和危险地带来手动控制，在很大程度上节约了人力资源以及时间和安全性。气动球阀具体分类有：不锈钢气动球阀，塑料气动球阀，卫生级气动球阀，碳钢气动球阀，二通气动球阀，三通气动球阀，四通气动球阀。

德国TOP托普气动三片式球阀技术参数：
阀体材料：WCB、304、316
阀门口径：DN15-50
阀门压力：PN16-PN64
连接标准：ASME B16.10、DIN2501 
控制方式：手动、气动、电动
密封材料：PTFE、304 
工作温度：-20℃至+150℃（可以定制350℃）

德国TOP托普气动三片式球阀优点：
流体阻力小，其阻力系数与同长度的管段相等。 
结构简单、体积小、重量轻。 
紧密可靠，球阀的密封面材料广泛使用塑料、密封性好，在真空系统中也已广泛使用。 
操作方便，开闭迅速，从全开到全关只要旋转90°，便于远距离的控制。 
维修方便，气动球阀结构简单，密封圈一般都是活动的，拆卸更换都比较方便。 
在全开或全闭时，球体和阀座的密封面与介质隔离，介质通过时，不会引起阀门密封面的侵蚀。 
适用范围广，通径从小到几毫米，大到几米，从高真空**压力都可应用。 


德国TOP托普气动三片式球阀应用领域：
水、蒸汽、油品、化工领域等流体

Germany TOP top pneumatic three ball valve overview:
Pneumatic three piece ball valve is three piece ball valve, equipped with pneumatic actuator. Pneumatic actuators relatively fast execution speed, the fastest switching speed of 0.05 seconds / second, so also usually called pneumatic quick cut ball valve. Pneumatic ball valve is usually equipped with various accessories such as solenoid valves, air FRL limit switch, positioners, control box, in order to achieve local control and remote centralized control, the control room can control valve switch, do not need to run to the site or zone of high altitude and dangerous to manual control, to a great extent to save human resources and time and safety. Pneumatic ball valves are classified as follows: stainless steel pneumatic ball valve, plastic pneumatic ball valve, sanitary pneumatic ball valve, carbon steel pneumatic ball valve, two air driven ball valve, three air driven ball valve, four air actuated ball valve.
The three valve technology parameters of Germany TOP top gas:
Body material: WCB, 304, 316
Valve bore: DN15-50
Valve pressure: PN16-PN64
Connection standards: ASME, B16.10, DIN2501
Control mode: manual, pneumatic, electric
Sealing materials: PTFE, 304
Operating temperature: -20 DEG C to +150 C (350 DEG C can be customized)
Germany TOP top three ball valve pneumatic advantages:
The fluid resistance is small, and the coefficient of drag is equal to the pipe length of the same length.
The utility model has the advantages of simple structure, small size and light weight.
Tight and reliable, ball valve sealing surface materials widely used plastic, good sealing, vacuum system has also been widely used.
Convenient operation, open and close rapidly, from fully open to fully closed as long as 90 degree rotation, facilitate remote control.
Easy maintenance, pneumatic ball valve structure is simple, sealing ring is generally moving, disassembly and replacement are more convenient.
In full open or full closed, the ball and valve seat sealing surface and dielectric isolation, the media through, will not cause the valve sealing surface erosion.
Wide range of applications, from a few millimeters to a few millimeters, large to a few meters, from high vacuum, high pressure can be applied.
Three ball valve pneumatic top German TOP applications:
Fluid, such as water, steam, oil, chemical industry, etc.

Su wen bin  (苏文宾）
Please do not hesitate to contact me if you need any further clarifications
QQ;   3202186864
Mobile Phone :  (微信同号）
Company Phone :021-64387268
Add :  上海徐汇区龙漕路51弄