NC数控滚轮送料机

NC 数控滚轮送料机   NC ROLL FEEDER
特性及构造 Features and construction ：
1、高精度的送料 ：针对高科技来临，以电脑闭路式回授系统控制，使精度确保在±0.03MM以内
High-precision feeding：Aiming at the arrival of hi-tech industry it is controlled by computer closed-circuit feedback system.so that the precision can maintain within±0.3MM
2、阶段式送料机能 ：可输入20组不同的送料长度，每组提供999次冲压次数，满足特殊制品的加工生产（选配）
Phase-style feeding function:it can input 20 groups of different feeding length, each group provides punching for 999 times to satisfy the processing and production of special products(option)
3、个性化的手动模式 ：可输入适合的3段手动速度，让使用者更容易操作，精确地使材料送近模具而定位
Manual model : it can input 3 phases manual speed,which can let used operate more easily and feed materials more accuracy.
4、高效率的放松装置：配合冲床之凸轮讯号以及简单之料厚调整，即可快速的设定放松角度
High-effciency release device:it can set up release angle quickly,only match Cam ** of and adjusted feed thickness can done.
5、送料长度的设定：在控制面板上，直接输入送料长度，即可达到所需的送距
Feeding length setting: input feed length on the controller panel directly.
6、送料机构：滚轮采用中空式，重量轻，回转惯性小，表面硬度HR60°镀硬铬，耐磨损，寿命长
Feeding unit:the roll adopts middle-hollow style,being light and with low intertia for electropiate.the surface hardness HRC60°and hard chorme plated.