产品规格: |
NCF-100/200/300/400/500/600/700/800/1000/1300(A) |
产品数量: |
26.00 台 |
包装说明: |
不限 |
价格说明: |
不限 |
查看人数: |
141 人 |
本页链接: |
https://info.b2b168.com/s168-60163428.html |
东莞恒力机械设备有限公司
NC 数控滚轮送料机 NC ROLL FEEDER
特性及构造 Features and construction :
1、高精度的送料 :针对高科技来临,以电脑闭路式回授系统控制,使精度确保在±0.03MM以内
High-precision feeding:Aiming at the arrival of hi-tech industry it is controlled by computer closed-circuit feedback system.so that the precision can maintain within±0.3MM
2、阶段式送料机能 :可输入20组不同的送料长度,每组提供999次冲压次数,满足特殊制品的加工生产(选配)
Phase-style feeding function:it can input 20 groups of different feeding length, each group provides punching for 999 times to satisfy the processing and production of special products(option)
3、个性化的手动模式 :可输入适合的3段手动速度,让使用者更容易操作,精确地使材料送进模具而定位
Manual model : it can input 3 phases manual speed,which can let used operate more easily and feed materials more accuracy.
4、高效率的放松装置:配合冲床之凸轮讯号以及简单之料厚调整,即可快速的设定放松角度
High-effciency release device:it can set up release angle quickly,only match Cam ** of and adjusted feed thickness can done.
5、送料长度的设定:在控制面板上,直接输入送料长度,即可达到所需的送距
Feeding length setting: input feed length on the controller panel directly.
6、送料机构:滚轮采用中空式,重量轻,回转惯性小,表面硬度HR60°镀硬铬,耐磨损,寿命长
Feeding unit:the roll adopts middle-hollow style,being light and with low intertia for electropiate.the surface hardness HRC60°and hard chorme plated.
欢迎来到东莞恒力机械设备有限公司网站,我公司位于素有“龙舟之乡、中国民间艺术之乡、举重之乡、粤剧之乡”之美誉,号为“世界工厂”的东莞市。 具体地址是
广东东莞塘厦林村里牙塘工业区165号,联系人是陈。
主要经营NC三合一送料机 精密整平机 凸轮驱动送料机 高速滚轮送料机 NC数控滚轮送料机 空气自动送料机 重型材料架 材料矫正机。
单位注册资金单位注册资金人民币 100 万元以下。