新进口美国燃气发电机火花塞缸温热电偶端子式济柴配件190全配件

莱芜尼凯机械供应瓦斯气沼气等燃气发电机等各种零部件，质量可靠，价格优惠，欢迎订购！莱芜尼凯机械设备有限公司-中国山东，主要生产经营燃气发电机零配件!主营胜动、济柴、潍柴瓦斯发电机等燃气发电机配件，如火花塞，磁电机，步进电机及电位器，压敏模块，可控硅，减振器座，油嘴压板，压套，注油器护套，三包整流变压器，各种数据线，热电偶，机油滤网，波纹管，各种线圈等近百种12V190燃气发电机配件产品。配件适用如下等等瓦斯发电机型号：
机组型号	500GF1-2RW/2PWW	500GF1-3RW/3PWW	600GF1-RW/PWW	600GF1-1RW/1PWW
发动机型号	W12V190ZLDK-2B	W12V190ZLDK-2C	W12V190ZLDK-2D	W12V190ZLDK-2E
发电机型号	1FC6455-6LA42	1FC6457-6LA42
(同时提供燃气发电机维修服务,专业人员维修保养，敬请放心！）

MY FLUX FOR USA NK-SJ611 is an fluoride-alkaline-type sintered flux,and its alkalinity is approximately 1.8. The flux is composed of grey?ball grains. Matching with some welding wires such as 1 Cr13,2Cr13 and 3 Cr13 or welding belts,it may be used in build-up?welding of conticaster rolls,hot-rolled rolls and back-up rolls. It has better high-temperature slag detachability and a good?appearance of weld. It possesses the following features:the alloy elements in welding wires have a full transition,and the?chemical composition in welding layers is evenly distributed. Both its welding performance and metallurgical property are?superior over homemade HJ107 flux.
Cautions:
1.The welding flux must be baked for 2 hours at the temperature of 300-350℃ before build-up welding.]
2.Some foreign substances such as rust,grease and moisture on the weldment should be removed before welding.
3.It should be used in build-up welding with reversed electrode DC.
4.It should be used in welding as per the build-up welding technique required by weldments.
Welding layer hardness:HRC48±2
莱芜尼凯采用国外先进技术和*的生产设备，专业生产12V190燃气发电机组各种配件，且使用寿命长，**，量大从优。
该产品包装采用的是纸盒包装，包装严密。
使用本公司的产品如3天之内出现质量问题，可免费退换。