jv-yNK-300 | Main device 变频驱动,PLC控制,配有触摸屏显示器(输送、材料放卷变频控制) Frequency device, PLC control system matched with touched screen( material unwinding unit control by inverter) 材料横张力控制,零速自动换接料 Material tension control unit, auto material connecting. 齿片高速粉碎机(可使用未处理浆) High speed saw type crusher machine( can use untreated fluff pulp) SAP自动抽料混合施加装置或SAP表面施加装置 SAP feeding mixed with fluff pulp or feeding on the core surface directly 棉芯模轮成型 Forming drum feeding unit ADL断切装置 ADL cutting unit 立体护围面料施加装置 Leak cuff feeding unit 弹力耳贴+左右贴施加装置 Elastic ear tap+ side tap feeding unit “S”切施加装置 “S”cutting unit 底膜在线复合施加装置 bottom film online laminating unit 前腰贴图案定位切装置 frontal tape position-checking cutting unit 材料纠偏装置 Raw material web guide unit 安全防护门 Safety door |
主要技术参数: Main technical parameters: 设计速度:300片/分 Design working speed:300pcs/min 生产速度:200片—250片/分 Working speed:200—250pcs/min 开机率:≧85% Efficiency :≧85% 生产成品率:≧97% Qualified rate:≧97% 电源: 380V 50HZ Power :380V 50HZ 装机功率:190-210KW Installation capacity:190-210KW 气耗:4800升/分 气压:0.6--0.8Mpa Air requirement:4800L/min Air pressure:0.6--0.8Mpa 安装尺寸:长23-27米 宽5-8米 高4-5米 Installation space :Length 23-27m Width5-8m High 4-5m |