克鲁勃KLUBER Klubersynth GH 6-100合成齿轮和高温油

辽宁恒润石油化工有限公司是中国的工业化学品进口批发服务商，致力于为客户提供高效便捷的服务，我司与国外70多家品牌生产商代理商建立长期的战略合作伙伴关系，能够快速帮助客户解决实际问题保证、并且长期稳定为客户储备库存，节约客户等货时间。涉及行业油：汽车行业、矿山行业、风电行业、纺织行业、石油开采、轨道交通、食品医疗、电子行业、船舶制造与维护保养、航空**、电机轴承、润滑系统、仪器行业。公司代理经销品牌有：瑞士摩托瑞斯MOTOREX、尼科NYCO、克鲁伯KLUBER、摩力克MOLYKOTE、魔力多MOLYDUVAL、科路德KLUTHE、福斯FUCHS、潘东兴PENTOSIN、阿维亚AVIA、安润龙ANDEROL、亚拉ARAL、雪弗龙Chevron、赤士顿CHESTERTON、、LE、劳勃抗LUBCON、好富顿HOUGHTON、嘉实多Castrol、魔力大MOLYDAL、罗哥ROCOL、凯密特尔Chemetall、等品牌润滑油、润滑脂、防锈油、磨削液、切削液、锂基脂等。
公司官网：www.ruibolube.con  咨询热线：     

KlübersynthGH6-100

合成齿轮和高温油

与KlüberComp润滑技术

产品描述

KlübersynthGH6是一种基于聚乙二醇的合成齿轮和高温油，可满足不断增长的要求并提高现代齿轮的功率密度。它包括KlüberComp润滑技术*，即它基于特别高级的原材料和添加剂，在所有齿轮部件的润滑中实现性能。

根据DIN 51517-3，KlübersynthGH6明显**过CLP要求。如果遵守一般应用说明，相应的齿轮可以切换到KlübersynthGH6，而*事先咨询齿轮制造商。

如果选择ISO VG 220或更高，KlübersynthGH6可提供API GL-5的高抗划载能力。即使在较高的峰值载荷，振动或振动下，或者如果没有进行磨合，齿轮也可以充分防止磨损。齿轮和滚动轴承的出色磨损保护确保了润滑部件的使用寿命得以实现，从而降低了维护和维修成本。根据FVA 54/7，GFT≥10的高抗微点蚀性能提供足够的保护齿轮承受高负荷，通常容易受到这种类型的损坏。

KlübersynthGH6具有比矿物油更长的使用寿命，因为所选原料具有的抗老化和抗氧化性能。因此可以延长维修间隔并降低维护成本。在某些应用中，甚至可以进行终身润滑。该产品具有低泡沫倾向和抗腐蚀性能，可实现无故障的齿轮操作。由72 NBR 902（例外：ISO VG 22），75 FKM 585,75 FKM 260466和75 FKM 170055制成的Freudenberg密封件可抵抗KlübersynthGH6.防止泄漏和油污染。

的粘度 - 温度特性支持在较宽的使用温度范围内形成足够的润滑膜，即使在高温和高温下也是如此。因此，在许多应用中，单一粘度等级可以涵盖低温和高温。

精心挑选的基础油带来的优化摩擦性能可减少动力损失并提高齿轮效率，尤其是蜗轮。由于优化的添加剂，磨损值降低，并且根据DIN 3996（蜗轮的负载能力的计算）实现了非常低的磨损强度。

KlübersynthGH6获得西门子 - 弗兰德，西门子齿轮电机，SEW Eurodrive，Getriebebau Nord，StöberAntriebstechnik，Lenze，ZAE Antriebssysteme，Cavex，Bonfiglioli，Rossi Motoriduttori，Motovario，Moventas，Boston Gear，Baldor等的认可。

通过使用KlübersynthGH6，您可以从众多优势中受益，这些优势将帮助您轻松高效地节省成本。我们期待您的回音。

*有关详细信息，请参阅我们的传单：KlüberComp润滑油技术 - 满足要求的齿轮油

适用于您的应用程序

高抗划伤保护

齿轮和滚动轴承的出色磨损保护

良好的剪切稳定性，可靠的润滑膜形成

高抗微点蚀性

优化蜗轮的润滑

的抗老化和抗氧化性

由于良好的粘温特性，使用温度范围宽

低泡沫倾向

优化摩擦性能可节省能源

弹性体兼容性好

许多齿轮OEM的认证

Klübersynth GH 6-100

Synthetic high-performance gear and high-temperature oil

with KlüberComp Lube Technology

Product description

Klübersynth GH 6 is a synthetic high-performance gear and high-temperature oil based on polyglycol satisfying the growing requirements and increasing power density of modern gears. It includes KlüberComp Lube Technology*, i.e. it is based on especially high-grade raw materials and advanced additives, enabling maximum performance in the lubrication of all gear components.

Klübersynth GH 6 clearly exceeds CLP requirements according to DIN 51517-3. Corresponding gears can be switched to Klübersynth GH 6 without prior consultation with the gear manufacturer provided the general application notes are observed.

Klübersynth GH 6 offers high scuffing load capacity of API GL-5 if ISO VG 220 or higher is selected. Gears are sufficiently protected against scuffing even at extremely high peak loads, vibrations or oscillations, or if no running-in was performed. The excellent wear protection of both gears and rolling bearings ensures that the service life calculated for the lubricated components is achieved, leading to lower maintenance and repair costs.The oil&＃39;s high micropitting resistance of GFT ≥ 10 according to FVA 54/7 offers sufficient protection to gears that are subject to high loads and would normally be susceptible to this type of damage.

Klübersynth GH 6 offers a much longer service life than mineral oils due to the excellent ageing and oxidation resistance of the selected raw materials; thus service intervals can be extended and maintenance costs reduced. In certain applications, even lifetime lubrication is possible. The product&＃39;s low foaming tendency and anti-corrosive properties enable problem-free gear operation. Freudenberg seals made of 72 NBR 902 (exception: ISO VG 22), 75 FKM 585, 75 FKM 260466 and 75 FKM 170055 are resistant to Klübersynth GH 6. Leakage and oil contamination are prevented.

The excellent viscosity-temperature behaviour supports the formation of a sufficient lubricant film across a wide service temperature range, even at elevated and high temperatures. Therefore, a single viscosity grade can cover both low and high temperatures in many applications.

The optimised friction behaviour enabled by the carefully selected base oils reduces power loss and improves gear efficiency, especially in worm gears. Due to the the optimised additives wear values are reduced and a very low wear intensity according to DIN 3996 (calculation of load capacity of worm gears) is achieved.

Klübersynth GH 6 is approved by Siemens-Flender, Siemens Geared Motors, SEW Eurodrive, Getriebebau Nord, Stöber Antriebstechnik, Lenze, ZAE Antriebssysteme, Cavex, Bonfiglioli, Rossi Motoriduttori, Motovario, Moventas, Boston Gear, Baldor, etc.

By using Klübersynth GH 6 you can benefit from a number of advantages that will help you save costs easily and efficiently. We look forward to hearing from you.

* For further information, please see our flyer: KlüberComp Lube Technology – Gear oils meeting the highest requirements

Benefits for your application

High scuffing protection

Excellent wear protection for gears and rolling bearings

Good shear stability for reliable lubricant film formation

High micropitting resistance

Optimised for the lubrication of worm gears

Excellent ageing and oxidation resistance

Wide service temperature range due to good viscosity-temperature behaviour

Low foaming tendency

Energy savings due to optimised friction behaviour

Good elastomer compatibility

Approvals by numerous gear OEMs