圆管抛光机是对圆形金属管材进行表面抛光和拉丝的专业设备，经过抛光后的管材表面可以达到镜面效果。
Round tube polishing machine is a round metal pipe surface polishing and drawing of professional equipment, after polishing the surface of the pipe can achieve the mirror effect.

圆管抛光机的机组构成/The composition of the tube polishing machine：
抛光机组由上料架、抛光机、下料架等3部分组成。上料架负责将待抛光的管材放置好，然后向抛光机组送料。抛光机组主要是对管材进行外表面进行抛光，通过抛光轮和抛光蜡的结合，是管材表面达到镜面效果。下料架就是负责将抛光后的管材进行集中收集，然后打包。
Polishing unit consists of loading frame, polishing machine, unloading rack and other three parts. The loading frame is responsible for placing the pipe to be polished and then feeding the polishing unit. Polishing unit is mainly on the outer surface of the pipe to be polished, through the combination of polishing wheel and polishing wax, the pipe surface to achieve mirror effect. The unloading rack is responsible for collecting the polished tubing and then packing it.

圆管抛光机工作原理/Working principle of tube polishing machine：
管材进入抛光机组后，下方由托板**起，防止管材掉落，胶轮具有一定的斜角角度，同时由电机带动转动，方便管材在抛光过程中行进。抛光轮安装在打磨筒的筒轴上，由电机驱动转动，通过调节杆进行前后调节，对管材进行表面打磨。
After the pipe enters the polishing unit, the bottom is raised from the pallet to prevent the pipe from falling, the rubber wheel has a certain angle of inclination, and is driven by the motor to facilitate the pipe to travel in the polishing process. The polishing wheel is mounted on the cylinder shaft of the grinding drum, and is rotated by the motor, through the adjustment rod before and after the adjustment, the surface of the pipe grinding.

佛山市管锈钢商贸有限公司专注于设备等