特点 Characteristics
1、**大工作台面，适应大面积薄板冲压及自动化级进模生产，工作效率高。
1、Extra large worktable, suitable for great area sheet metal pressing and automatic step molding production, high working efficiency.
2、优质钢板焊接机身，提高了机床强度和刚度。
Steel welded body enhancing the intensity and rigidity of the machine.
3、大齿轮、齿轮轴精密研磨，机床工作噪音低，运行平稳。
Precisely grinded rack wheel and wheel shaft, low machine operation noise and stable operation.
4、采用干式或湿式气动摩擦离合－制动器，动作灵敏。
Adoption of dry or wet pneumatic frictional clutch-detent, the movements are sensitive.
5、采用双曲轴逆向传动，同步性好，抗偏载能力强。
Adoption of dual-crooked shaft converse transmission, providing excellent synchronization and strong anti carry-deflection capability.
6、滑块采用六面矩形导轨，导向好，精度高。
Slide blocks with six-sidedrectangle gui derail, the guidance is excellent and the precisions are pinpointed.
7、无级调整电机装置，适应不同冲压件工艺要求。
Stepless gearings motor or device, fitting the craftsmanship of different pressing parts.
标准配置 Standard accessories
| 1、液压**负荷保护装置。 | Hydraulic over loading protection system. |
| 2、自动润滑装置。 | Automatic lubricating system. |
| 3、装模高度电动调节装置。 | Mould installation height adjustment device. |
| 4、无极调速电机装置。 | Stepless gearing electromotor device. |
| 5、数显模高指示器。 | Digital display mould height indicator. |
| 6、滑块及模具平衡装置。 | Balance unit for slide block and mould. |
| 7、电子凸轮控制系统和移动电柜。 | Electronic cam controller system and movable electrical equipments control box. |
| 8、可移动双手操作盒 | Movable operation box for both hands. |
| 9、空气吹料装置。 | Air power material blowing device. |
| 10、防震用橡垫。 | Shock resist rubber mat. |
选配配置 Optional accessories
| 1、气囊式模垫装置。 | Air bag mould mat device. |
| 2、光电式安全装置。 | Photo electricity safety device. |
| 3、脚踏开关。 | Pedal power switch. |
| 4、自动送料输出轴。 | Automation on feeding output shaft. |
| 5、自动送料机。 | Automatic feeding device. |
| 6、快速换模装置。 | Papid mold displacing unit. |
特殊要求 Special Requirements
点击图片查看大图
主要技术参数 Main technical parameter
| 型号/技术参数 Model/Technical parameters | JH25-110 | JH25-160 | JH25-200 | JH25-250 | JH25-315 | ||||||||
| L | S | L | S | L | S | L | S | L | S | ||||
| 滑块公称压力(KN) Slide block nominal pressure(KN) | 1100 | 1600 | 2000 | 2500 | 3150 | ||||||||
| 能力发生位置（mm） Capacity engender position (mm) | 5/3 | 6/3.5 | 7/4 | 7/4 | 7/4 | ||||||||
| 滑块行程（mm） Slide block stroke (mm) | 180/110 | 200/130 | 250/150 | 250/150 | 280/180 | ||||||||
| 行程次数 （S.P.M） Stroke frequency （S.P.M） | L | 35-65 | 30-55 | 25-45 | 25-40 | 20-35 | |||||||
| S | 45-80 | 40-75 | 35-60 | 30-55 | 30-50 | ||||||||
| 较大封闭高度(mm) Max closing height(mm) | 400/435 | 450/485 | 500/550 | 550/600 | 550/600 | ||||||||
| 封闭高度调节量(mm) Closing height adjust measurement(mm) | 90 | 100 | 110 | 120 | 120 | ||||||||
| 滑块中心距机身距离(mm) Distance between the center of the slide block and the body(mm) | 350 | 390 | 430 | 450 | 450 | ||||||||
| 工作台至地面距离 (mm) Distance between the worktable and ground (mm) | 900 | 900 | 1000 | 14100 | 1100 | ||||||||
| 工作台尺寸 (mm) Worktable measurements (mm) | 左右 Left Right | 1880 | 2040 | 2420 | 2700 | 2700 | |||||||
| 前后 Front Behind | 680 | 760 | 840 | 920 | 920 | ||||||||
| 滑块底平面尺寸 (mm) Plane dimension of the slide block bottom (mm) | 左右 Left Right | 1360 | 1500 | 1850 | 2100 | 2100 | |||||||
| 前后 Front Behind | 520 | 580 | 650 | 700 | 700 | ||||||||
|
外形尺寸 (mm) Outline (mm) |
左右 Left Right | 2170 | 2340 | 2720 | 2970 | 2990 | |||||||
| 前后 Front Behind | 1790 | 2040 | 2500 | 2750 | 2950 | ||||||||
| 高 Height | 3130 | 3823 | 4050 | 4350 | 4360 | ||||||||
| 气囊 Airbag | **出能力KN Propping capacity KN | 35×2 | 63×2 | 80×2 | 100×2 | 140×2 | |||||||
| 行程 mm Stroke mm | 70 | 80 | 90 | 100 | 100 | ||||||||
| **板面积 mm Propping plate acreage mm | 350×220×2组 | 410×220×2组 | 460×340×2组 | 540×420×2组 | 560×420×2组 | ||||||||
| 电动机功率（kw） Electromotor Power (kw) (Fixation/Variable) | 15 | 18.5 | 22 | 30 | 37 | ||||||||
| 重量（kg） Weight (kg) | 14500 | 21000 | 28500 | 38000 | 42500 | ||||||||
| 使用空气压力（Mpa） Air pressure used (Mpa) | 0.5 | 0.5 | 0.5 | 0.5 | 0.5 | ||||||||
技术参数如有变动，恕不另行通知！
东莞市明浩通机械技术有限公司专注于开式固定台压力机,半闭式高性能压力机,闭式双点固定台压力机等